Diesel Engine Speed Governor ESD5550 as Replacement for Cummins Generator Spare Parts Suitable for Genset Speed Control with Product Warranty

• Customization: Available
• After-sales Service: 1 Year Warranty
• Warranty: 1 Year Warranty
• Model NO.: ESD5550
• Type: Speed Control
• Installation Method: Fixed
• Stroke: Speed Control
• Cooling Method: Speed Control
• Output Type: Speed Control
• Speed: Speed Control
• Conditions of Use: Land Use
• Usage: Speed Control
• Landuse Type of Unit: Speed Control
• Excitation Mode: Speed Control
• Transport Package: Papar Carton
• Specification: 10X5X4 cm
• Trademark: DIY POWER
• Origin: China
• HS Code: 8803900090
• Production Capacity: 5000/Year

Product Description

The ESD5550/5570 Series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.
(PER5570E is designed for EFC series.)
Isochronous Operation/Steady Stability-----+/-0.25% or better
Supply-----12 or 24 VDC Battery Systems(transient&reverse voltage protected)
Power Consumption-----50 ma continuous plus Actuator current
Maximum Actuator Current at 25ºC(77ºF)-----10 Amps continuous
We provide speed controllers as follows:
4914090,4914091,ESD5500E,ESD5522E,ESD5520E,ESD5550E,ESD5570E,ESD5222,ESD5221,
ESD5111,ESD5120,ESD5330,S6700E,4913988,3044195,3062323,3032733,3044196,3062322,
3098693,3037359



Technical Data:

Input	Supply	12 or 24 VDC Battery System (Transient and Reverse Voltage)
	Polarity	Negative Ground (Case Isolated)
	Power Consumption	50 ma continuous plus actuator current
	Actuator Current Range @77F (25C) - (Inductive Load)	Min.2.5 Amps; Max. 10Amps continuous
	Speed Sensor Signal	0.5-120 Volts RMS
	Speed switch Relay Contacts(N.O.and N.C)	10 Amps
Performance	Isochronous Operation/Steady State Stability	±0.25% or better
	Speed Range/Governor	1K to 7.5K Hz continuous
	Speed Drift with Temperature	±1% Max
	Idle Adjust CW	60% of set speed
	Idle Adjust CCW	Less than 1200 Hz.
	Droop Range	1-5% regulation
	Droop Adj. Max. (K-L connected)	400 Hz.,±75Hz. Per 1.0A change
	Droop Adj. Min. (K-L connected)	15Hz.,±6Hz. Per 1.0A change
	Speed Trim Range	±200 Hz
	Remote Variable Speed Range	500 - 7.5 Hz. Or any part there of Terminal Sensitivity
	Terminal Sensitivity J	100 Hz.,±15Hz / Volt @ 5.0 K Impedance
	Terminal Sensitivity L	735 Hz.,±60 Hz / Volt @ 65 K Impedance
	Terminal Sensitivity N	148 Hz.,±10 Hz / Volt @ 1 Meg. Impedance
	Terminal Sensitivity P	10 VDC Supply @ 20 ma Max
	Speed witch adjustment range	1000-10000HZ
Environmental	Ambient Operating Temperature Range	-40 to +180°F(-40°+85°C)
	Relative Humidity	Up to 95%
	All Surface Finishes	Fungus Proof and Corrosion Resitant
Reliability	Vibration	1G @ 20 to 100 Hz.
	Testing	100% Functionally Tested
Physical	Dimensions	See outline (FIGURE 1)
	Weigh1	1.8 lbs.(820 grams)
	Mounting	Any position, Vertical Preferred