Diesel Engine Speed Governor ESD5330 Spare Parts Suitable for Genset Speed Control as Replacement for Cummins Generator

• Customization: Available
• After-sales Service: 1 Year Warranty
• Warranty: 1 Year Warranty
• Model NO.: ESD5330
• Type: Speed Control
• Installation Method: Fixed
• Stroke: Speed Control
• Cooling Method: Speed Control
• Output Type: Speed Control
• Speed: Speed Control
• Conditions of Use: Land Use
• Usage: Speed Control
• Landuse Type of Unit: Speed Control
• Excitation Mode: Speed Control
• Transport Package: Papar Carton
• Specification: 10X5X4 cm
• Trademark: DIY POWER
• Origin: China
• HS Code: 8803900090
• Production Capacity: 5000/Year

Product Description

The ESD series governor are precise speed controls designed and manufactured in various configurations to meet application requirements using the latest analog and digital control technologies.
 
A wide variety of application needs can be satisfied with ESD series constant or variable speed governing, in isochronous or droop operation.
 
The ESD5330 series speed control unit is rugged enough to be placed in a control cabinet or engine mounted enclosure with other dedicated control equipment.The circuit board is conformally coated to seal out moisture and resist vibration.If water,mist or condensation can come in contact with the controller,it should be mounted vertically.This will allow any accumulated fluids to drain away from the speed control unit.
 

Input	Supply	24±20% VDC battery systems ( transient and reverse voltage   Protected)
	Polarity	Negative Ground (Case Isolated)
	Power Consumption	100 MA (No Actuator current)
	Maximum Actuator  Current	Internally limited to 9 A continuous
	Speed Sensor Signal	0.5-50 Volts RMS
Performance	Isochronous   Operation/Steady State   Stability	±0.25% or better
	Speed Range/Governor	1K to 7.5K Hz continuous
	Speed Drift with   Temperature	±1 Max
	Idle Adjust CW	25-85% of rated speed
	Droop Range	Adjustable from 0-5% for a 1.5 A actuator current change
	Droop Adj. Max. (K-L   Jumpered)	400 Hz.,±75Hz. Per 1.0A change
	Speed Trim Range	±200 Hz
	Remote Variable Speed   Range	25 to 100% of rated speed
	Terminal Sensitivity H	-105 Hz,±15 Hz/Volt @ 5 K Impedance
	Terminal Sensitivity M	-130 Hz,±15 Hz/Volt @ 1 M Impedance
	Terminal Sensitivity K	-685 Hz,±40 Hz/Volt @ 225 K Impedance
	Terminal Sensitivity N	+1000 Hz,±50 Hz/Volt @ 8 K Impedance
Environmental	Ambient Operating   Temperature Range	-40 to +85 Deg. C
	Relative Humidity	Up to 95%
	All Surface Finishes	Fungus Proof and Corrosion Resitant
Reliability	Vibration	1G at 20 to 100 Hz.
	Shock	10 G (11 ms)
	Testing	100% Functionally Tested