10K~500kVA (3: 3) Industrial Online UPS for Data Center, Financial & Security, Postal & Telecom, Large Internet Computer, Medical & Health, Industrial Equipment

• Phase: Three Phase
• Type: On-line
• Protection: Overcurrent
• Application: Industry
• Classification: Lighting/Power
• Standby Time: Standard Machine
• Model NO.: VGUPS
• Standby UPS: Sine Wave Output UPS
• Output Capacity: Small Type
• Equipment Mode: Centralized Model
• Brand: Kstar
• Transport Package: Carton
• Specification: 443× 131× 580 MM
• Trademark: KSTAR
• Origin: China
• HS Code: 8504401990
• Production Capacity: 5000/Year

Product Description

UCR60-100 series UPS is a Rack/Tower convertible UPS solutions which integrates true double-conversion design, DSP technology to provide clean high-level quality power as well as better voltage conditions to different application. What's more, with N+X parallel redundancy, it can achieve higher availability and MTBF (mean time between failure) to fully protect mission-critical devices.
 

General Features

True double-conversion

Real-time digital signal processor (DSP) control

N+X parallel redundancy

Selectable quantity of battery for each group:for long run unit

Adjustable charging current via LCD

3-stage charging design optimizes battery performance

ECO mode operation for energy saving

Self-diagnosis at startup

Emergency power off function(EPO)

Maintenance bypass is convenient for maintenance

Generator compatible

Communications:RS-232,USB,SNMP card(Optional), Relay card (Optional)

Cold start
 

Technical Specification

MODEL			UCR60L		UCR100L
Capacity (VA/Watts)			6K / 5.4K		10K / 9K
INPUT
Nominal Voltage			380/400/415Vac(3Ph+N+PE) or 220/230/240Vac(L+N+PE)
Operating Voltage  Range			208~478Vac or 120VAC-276Vac
Operating Frequency  Range			50Hz:45~55Hz,60Hz:54~66Hz
Power Factor			≥0.99
Bypass Voltage  Range			Max.voltage: 220V:+25%(Optional +10%,+15%,+20% )
			230V:+20%(Optional +10%,+15%)
			240V:+15%(Optional +10% )
			Min. voltage: -45% (Optional -20%,-30%)
ECO Range			Same as bypass
Harmonic Distortion (THDi)			≤5%(100% non-linear load)
OUTPUT
Output Voltage			220/230/240Vac
Power Factor			0.9
Voltage Regulation			±1%
Frequency	Line Mode		±1%/±2%/±4%/±5%/±10% of the rated frequency(Optional)
	Bat.Mode		(50/60±0.1)Hz
Crest Factor			3:1
Harmonic  Distortion (THD)			≤2% with linear load
			≤5% with non-linear load
Waveform			Pure Sinewave
Transfer Time			Utility to Battery : 0ms; Utility to Bypass: 0ms
EFFICIENCY
Efficiency			Up to 94%
BATTERY
Battery Voltage			Selectable Voltage: ±96/108/120Vdc
Typical Recharge Time			6-8 hours (To 90% capacity)
Charging Current			Maximum current 10A
PROTECTION
Overload		Line Mode	Load≤125%: last 5min;≤150%: last 1min;>150% 200ms turn to bypass mode
		Bypass Mode	40A(Input breaker)		63A(Input breaker)
Short Circuit			Hold Whole System
Overheat			Line Mode: Switch to Bypass; Backup Mode: Shut down UPS immediately
Battery Low			Alarm and Switch off
INDICATORS
Audible &Visual Alarms			Line Failure, Battery Low, Overload, System Fault
Status LED &LCD Display			Line Mode, Backup Mode, Eco Mode, Bypass Mode, Battery Low, Battery Bad, Overload & UPS Fault
Parameters On The LCD Panel			Input/Output Voltage, Input/Output Frequency, Load Level, Battery Level, Inner Temperature & Remaining Battery Backup Time
MANAGEMENT
Communication Interface			RS-232,USB,Parallel card, SNMP card(Optional), Relay card (Optional)
ENVIRONMENT
Operating Temperature			0ºC~40ºC
Storage Temperature			-25ºC~55ºC
Humidity Range			0~95% (Non-condensing)
Altitude			< 1500m
Noise Level			<55dB
PHYSICAL
Dimension W×H×D (mm)			443×131×580(3U)
Net Weight (kg)			30		31
STANDARDS
Noise Suppression			Complies with EN62040-2
Safety			IEC/EN62040-1,IEC/EN60950-1
EMC			IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4,
			IEC61000-4-5,IEC61000-4-6,IEC61000-4-8
BATTERY PACK
Model			EXBR±120V
Battery type& Max.quantity			7Ah×20/9Ah×20
Dimensions  W×H×D (mm)			443×131×720(3U)
Net Weight (kg)			67