Vg-C355s-Cummins 6ltaa5.9g1 Engine Diesel Generator Set

• Customization: Available
• After-sales Service: Guarantee for One Year or 1200hours (Accord to Whi
• Warranty: One Year or 1200hours
• Model NO.: VG-C355S
• Type: Basic Diesel Generator
• Installation Method: Fixed
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Output Type: AC Three Phase
• Speed: Speed
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Low Noise
• Excitation Mode: Static Exciter
• Alternator Brand: Leroy-Somer
• Diesel Generator Power Range: 10kw - 4000kw
• Diesel Generator Certification: CE / ISO / TUV
• Controller: Comap
• Fuel Tank: Standard 8 Hours
• Transport Package: Plastic Seaworth Packing by FCL.
• Specification: 4000 * 1150 * 2174 mm
• Trademark: Cummins
• Origin: China
• HS Code: 8502120000
• Production Capacity: 50000

Product Description

VG-C355S

Cummins 6LTAA5.9G1 Engine with Stamford / Leroy Somer open type generator set.

Or you can customize it with your favorite brand engine or Alternator accordingly.

 

Product Description

Compression Ratio: 17.3:1 Aspiration: Turbocharged
Bore: 102 mm Displacement: 5.9 L
Storke: 120 mm No. of Cylinders: 6
Governor Regulation: ≤3% Fuel System: FR92632: BYC A/GAC 24V
FR93146: BYC A/GAC 12V
FR92650: BYC A/SEGMA

Engine Performance Data @ 1500 RPM Litre/hour

GENERAL ENGINE DATA
Approximate Engine Weight (wet)..............................-kg
Mass Moment of Inertia of Rotating Components (No Flywheel).........…-kg·m2
Center of Gravity from Rear Face of Block........................-mm
Center of Gravity above Crankshaft Centerline.....................-mm
Crankshaft Thrust Bearing Load Limit
-Maximum Intermittent..............................…-N 3425
-Maximum Continuous..............................…-N 1112
Maximum (Static) Bending Moment at Front Support Mounting Surface......-N.m 435
Maximum (Static) Bending Moment at Side Pad Mounting Surface.........-N.m TBD
Maximum (Static) Bending Moment at Rear Face of Block............…-N.m 1356
Moment of Inertia of Complete Engine
- Roll Axis.......................................…-kg·m2 16.5
- Pitch Axis.......................................-kg·m2 41.1
- Yaw Axis....................................... -kg·m2 35.4
Maximum Back Pressure....................................-kPa
Exhaust Pipe Size Normally Acceptable........................…-mm
Maximum Static Supported Weight at the Turbocharger Outlet Flange......-N.m
Exhaust Manifold Insulation Acceptable........................… -Yes/No
Turbocharger Insulation Acceptable...........................…-Yes/No
- Dirty Element...…................................…-kPa
- Clean Element...…................….............… -kPa
Minimum Dirt Holding Capacity with Heavy Duty Air Cleaner............-g/cfm
Maximum Temperature Rise from Ambient to the Inlet of the Turbocharger...-ºC
Recommended intake piping size (inner diameter)................... -mm
LUBRICATION SYSTEM
-Idle Speed....................................…-kPa 207
-Governed Speed.................................-kPa 345
Maximum Oil Temperature...................................-ºC 121
Oil Capacity with OP 9006 Oil Pan : High - Low.........…..............-litre 14.2 - 12.3
Minimum Required Lube System Capacity - Sump plus Filters..........…-litre 16.4
- Front Down.......................................- º 40
- Front Up.......................................…- º 40
- Side to Side.......................................- º 40
FUEL SYSTEM
Type Injection System..........................................… BYC A Direct Injection
Maximum Restriction at Lift Pump...…...........................-mmHg 102
Maximum Allowable Head on Injector Return Line (Consisting of Friction Head and Static Head)
.......................................…-mmHg 508
Total Drain Flow (constant for all loads)..........................…-litre/hr 30
COOLING SYSTEM
Coolant Capacity - Engine Only..............................…-litre 7.9
Maximum Coolant Friction Head External to Engine…-1800 rpm......... -kPa 35
-1500 rpm......... -kPa 28
Maximum Static Head of Coolant Above Engine Crank Centerline......….…-m 14
Standard Thermostat (Modulating) Range..................…....…-ºC 82 - 95
Minimum Pressure Cap.................................... -kPa 69
Maximum Top Tank Temperature for Standby / Prime Power......…........-ºC 104 / 100

ELECTRICAL SYSTEM Cranking Motor (Heavy Duty, Positive Engagement)….........-volt 12V 24V Battery Charging System, Negative Ground......….........…-ampere 63 40 Maximum Allowable Resistance of Cranking Circuit............ -ohm 0.00075 0.002 Minimum Recommended Battery Capacity • Cold Soak @ 10 °F (-12 °C) and Above...............…-0°F CCA 800 400

Product Parameters

230/400V, 50Hz, 0.8PF, 3P4W					DCEC Cummins Engine Specification											Alternator		Open Type		Silent Type
Genset Model	Standby Power		Prime Power		Model	Cylinder	Bore	Stroke	Dspl	Exhaust Temp	Lub-oil	Coolant	Max Power	Speed Gov	Fuel Csm.	Brand&Model		Dimension (mm)	Weight (kgs)	Dimension (mm)	Weight (kgs)
	kVA	kW	kVA	kW			mm	mm	L	ºC	L	L	kW		L/H	Stamford	Leroy-Somer
VG-C22	22	17.6	20	16	4B3.9-G11	4L	102	120	3.9	410	10.9	7.2	22	Elec	6.1	PI144D	TAL-A40-F	1750*980*1500	810	2240*1090*1685	1300
VG-C27.5A	27.5	22	25	20	4B3.9-G12	4L	102	120	3.9	420	10.9	7.2	30	Elec	8.0	PI144E	TAL-A40-G	1750*980*1500	810	2240*1090*1685	1300
VG-C27.5B	27.5	22	25	20	4B3.9-G1	4L	102	120	3.9	410	10.9	7.2	27	Mech	8.0	PI144E	TAL-A40-G	1750*980*1500	840	2240*1090*1685	1350
VG-C27.5C	27.5	22	25	20	4B3.9-G2	4L	102	120	3.9	410	10.9	7.2	27	Elec	7.5	PI144E	TAL-A40-G	1750*980*1500	860	2240*1090*1685	1370
VG-C30A	30	24	27.5	22	4B3.9-G12	4L	102	120	3.9	420	10.9	7.2	30	Elec	8.0	PI144F	TAL-A42-C	1750*980*1500	810	2240*1090*1685	1300
VG-C30B	30	24	25	20	4B3.9-G1	4L	102	120	3.9	410	10.9	7.2	27	Mech	8.0	PI144F	TAL-A42-C	1750*980*1500	840	2240*1090*1685	1350
VG-C30C	30	24	25	20	4B3.9-G2	4L	102	120	3.9	410	10.9	7.2	27	Elec	7.5	PI144F	TAL-A42-C	1750*980*1500	860	2240*1090*1685	1370
VG-C33	33	26.4	30	24	4B3.9-G12	4L	102	120	3.9	420	10.9	7.2	30	Elec	8.0	PI144G	TAL-A42-C	1750*980*1500	810	2240*1090*1685	1300
VG-C44A	44	35	40	32	4BT3.9-G1	4L	102	120	3.9	487	10.9	7.2	40	Mech	9.5	PI144J	TAL-A42-F	1750*980*1500	950	2240*1090*1685	1460
VG-C44B	44	35	40	32	4BT3.9-G2	4L	102	120	3.9	487	10.9	7.2	40	Elec	9.5	PI144J	TAL-A42-F	1750*980*1500	970	2240*1090*1685	1480
VG-C55	55	44	50	40	4BTA3.9-G2	4L	102	120	3.9	485	10.9	7.9	55	Elec	11.9	UCI224D	TAL-A42-G	1850*980*1500	990	2650*1090*1785	1550
VG-C62.5	62.5	50	56.3	45	4BTA3.9-G2	4L	102	120	3.9	548	10.9	8.3	55	Elec	14.1	UCI224E	TAL-A42-H	1850*980*1500	990	2650*1090*1785	1550
VG-C66A	66	53	60	48	4BTA3.9-G2	4L	102	120	3.9	548	10.9	7.9	64	Elec	14.3	UCI224E	TAL-A42-H	1850*980*1500	990	2650*1090*1785	1580
VG-C66B	66	53	60	48	4BTA3.9G-11	4L	102	120	3.9	548	10.9	8.3	64	Elec	14.3	UCI224E	TAL-A42-H	1920*920*1500	945	2650*1090*1785	1580
VG-C80	80	64	72.5	58	4BTA3.9G-11	4L	102	120	3.9	548	10.9	8.3	80	Elec	20.0	UCI224F	TAL-A44-C	1920*920*1500	950	2650*1090*1785	1610
VG-C88	88	70.4	80	64	4BTA3.9G-11	4L	102	120	3.9	548	10.9	8.3	80	Elec	20.0	UCI224G	TAL-A44-C	1920*920*1500	950	2650*1090*1785	1610
VG-C94A	94	75	85	68	6BT5.9-G1	6L	102	120	5.9	510	16.4	7.9	92	Mech	23.0	UCI224G	TAL-A44-C	2250*980*1500	1200	3150*1090*1835	1820
VG-C94B	94	75	85	68	6BT5.9-G2	6L	102	120	5.9	565	16.4	7.9	92	Elec	23.6	UCI224G	TAL-A44-C	2250*980*1500	1230	3150*1090*1835	1850
VG-C100	100	80	90	72	6BT5.9-G1	6L	102	120	5.9	510	16.4	7.9	92	Mech	23.4	UCI274C	TAL-A44-D	2250*980*1500	1200	3150*1090*1835	1820
VG-C110A	110	88	100	80	6BT5.9-G1	6L	102	120	5.9	510	16.4	7.9	92	Mech	23.4	UCI274C	TAL-A44-D	2250*980*1500	1230	3150*1090*1835	1850
VG-C110B	110	88	100	80	6BT5.9-G2	6L	102	120	5.9	565	16.4	7.9	92	Elec	23.6	UCI274C	TAL-A44-D	2250*980*1500	1230	3150*1090*1835	1850
VG-C125	125	100	113	90	6BTA5.9-G2	6L	102	120	5.9	570	16.4	9.9	116	Elec	27.1	UCI274D	TAL-A44-E	2320*980*1550	1310	3300*1090*1835	1970
VG-C138	138	110.4	125	100	6BTAA5.9-G2	6L	102	120	5.9	495	16.4	9.9	130	Elec	29.9	UCI274ES	TAL-A44-E	2320*980*1550	1310	3300*1090*1835	1970
VG-C150	150	120	137.5	110	6BTAA5.9-G2	6L	102	120	5.9	495	16.4	9.9	130	Elec	32.5	UCI274E	TAL-A44-H	2320*980*1550	1330	3300*1090*1835	1990
VG-C165	165	132	150	120	6BTAA5.9-G12	6L	102	120	5.9	507	16.4	9.9	155	Elec	35.7	UCI274F	TAL-A44-J	2320*980*1550	1350	3300*1090*1835	2010
VG-C175A	176	141	160	128	6CTA8.3-G1	6L	114	135	8.3	540	27.6	12.3	180	Mech	38.2	UCI274F	TAL-A44-K	2450*980*1710	1750	3600*1100*1975	2480
VG-C175B	176	141	160	128	6CTA8.3-G2	6L	114	135	8.3	563	23.8	12.3	180	Elec	38.2	UCI274F	TAL-A44-K	2450*980*1710	1780	3600*1100*1975	2510
VG-C200A	200	160	180	144	6CTA8.3-G1	6L	114	135	8.3	540	27.6	12.3	180	Mech	43.3	UCI274G	TAL-A44-L	2450*980*1710	1820	3600*1100*1975	2550
VG-C200B	200	160	180	144	6CTA8.3-G2	6L	114	135	8.3	563	23.8	12.3	180	Elec	43.3	UCI274G	TAL-A44-L	2450*980*1710	1850	3600*1100*1975	2580
VG-C220	220	176	200	160	6CTAA8.3-G2	6L	114	135	8.3	545	23.8	12.3	203	Elec	47.6	UCI274H	TAL-A44-M	2550*980*1760	1900	3600*1100*1975	2630
VG-C250A	250	200	225	180	6LTAA8.9-G2	6L	114	135	8.9	470	27.6	11.1	240	Elec	58.0	UCDI274J	TAL-A46-C	2570*1160*1680	2050	3850*1310*2117	2880
VG-C275A	275	220	250	200	6LTAA8.9-G3	6L	114	145	8.9	542	27.6	11.1	250	Elec	59.5	UCDI274K	TAL-A46-D	2570*1160*1680	2050	3850*1310*2117	2880
VG-C300	300	240	275	250	6LTAA9.5-G3	6L	116	148	9.5	482	28.1	55.5	262	Elec	66.0	HCI444D	TAL-A46-E	2550*1020*1790	2100	4000*1400*2100	4150
VG-C330	330	264	300	240	6LTAA9.5-G1	6L	116	148	9.5	600	28.1	55.5	320	Elec	78.0	HCI444D	TAL-A46-F	2550*1020*1790	2100	4000*1400*2100	4150
VG-C355	355	284	325	260	6LTAA9.5-G1	6L	116	148	9.5	600	28.1	55.5	320	Elec	78.0	HCI444ES	TAL-A46-G	2550*1020*1790	2100	4000*1400*2100	4150
VG-C413	412.5	330	375	300	6ZTAA13-G3	6L	130	163	13	594	45.4	23.1	380	Elec	89.3	HCI444FS	TAL-A47-A	3050*1200*1740	3260	4300*1410*2174	4150
VG-C440A	440	352	400	320	6ZTAA13-G2	6L	130	163	13	641	45.4	23.1	415	Elec	95.2	HCI444F	TAL-A47-A	3050*1200*1740	3340	4300*1410*2174	4230
VG-C475A	475	380	438	350	6ZTAA13-G2	6L	130	163	13	668	45.4	23.1	415	Elec	89.1	HCI544C	TAL-A47-B	3050*1200*1740	3360	4300*1410*2174	4250
VG-C475B	475	380	438	350	6ZTAA13-G4	6L	130	163	13	668	45.4	23.1	415	Elec	91.4	HCI544C	TAL-A47-B	3110*1200*1740	3400	4300*1410*2174	4290
VG-C475C	475	380	438	350	QSZ13-G2	6L	130	163	13	530	45.42	23.1	440	Elec	98.7	HCI544C	TAL-A47-B	3100*1360*1920	3355	4350*1410*2260	4300
VG-C500A	530	424	500	400	QSZ13-G3	6L	130	163	13	530	45.4	23.1	470	ECM	104.8	HCI544C	TAL-A47-C	3100*1360*1920	3375	4350*1410*2260	4320
VG-C500B	500	400	450	360	QSZ13-G5	6L	130	163	13	535	45.4	23.1	440	ECM	98.8	HCI544C	TAL-A47-B	3100*1360*1920	3395	4350*1410*2260	4340
VG-C385	385	308	350	280	QSZ13-G6	6L	130	163	13	535	45.4	23.1	350	ECM	76.1	HCI444E	TAL-A46-H	3100*1360*1920	3425	4350*1410*2260	4370
VG-C400	400	320	363	290	QSZ13-G6	6L	130	163	13	535	45.4	23.1	350	ECM	79.1	HCI444FS	TAL-A46-H	3100*1360*1920	3455	4350*1410*2260	4400
VG-C440B	440	352	400	320	QSZ13-G7	6L	130	163	13	545	45.4	23.1	415	ECM	87.0	HCI444F	TAL-A47-A	3100*1360*1920	3495	4350*1410*2260	4440
VG-C66	66	52.8	60	48	QSB3.9-G2	4L	102	120	3.9	465	10.9	7	70	ECU	19.0	UCI224E	TAL-A42-H	1850*980*1500	970	2670*1080*1905	1500
VG-C70	70	56	65	52	QSB3.9-G2	4L	102	120	3.9	465	10.9	7	70	ECU	19.0	UCI224F	TAL-A44-C	1850*980*1500	970	2670*1080*1905	1500
VG-C88	88	70.4	80	64	QSB3.9-G3	4L	107	120	3.9	430	10.9	7	88	ECU	23.0	UCI224G	TAL-A44-C	1850*980*1500	970	2670*1080*1905	1500
VG-C110	110	88	100	80	QSB5.9-G2	6L	102	120	5.9	467	16.4	9	106	ECU	28.0	UCI274C	TAL-A44-D	2140*950*1530	1270	3200*1080*2000	1780
VG-C137.5	137.5	110	125	100	QSB5.9-G3	6L	102	120	5.9	490	16.4	9	132	ECU	34.0	UCI274ES	TAL-A44-E	2140*950*1530	1270	3200*1080*2000	1780
VG-C165	165	132	150	120	QSB6.7-G3	6L	107	124	6.7	500	19.5	9.4	166	ECU	42.0	UCI274F	TAL-A44-J	2400*950*1530	1380	3500*1080*2120	2130
VG-C200	200	160	182	145.6	QSB6.7-G4	6L	107	124	6.7	494	19.5	9.4	185	ECU	48.0	UCI274G	TAL-A44-L	2400*950*1530	1380	3500*1080*2120	2180
VG-C220C	220	176	200	160	QSL8.9-G2	6L	114	144.5	8.9	510	28.1	11.1	226	ECU	59.0	UCI274H	TAL-A44-M	2450*950*1690	1760	4000*1400*2100	4150
VG-C250B	250	200	225	180	QSL8.9-G3	6L	114	144.5	8.9	510	28.1	11.1	242	ECU	62.0	UCDI274J	TAL-A46-C	2450*950*1690	1760	4000*1400*2100	4150
VG-C275B	275	220	250	200	QSL8.9-G4	6L	114	144.5	8.9	513	28.1	11.1	258	ECU	64.0	UCDI274K	TAL-A46-D	2450*950*1690	1760	4000*1400*2100	4150

Company Profile

VIGKOO provides diesel generator power spare parts and engineering accessories worldwide, including Cummins, Caterpillar, Perkins, Deutz, Volvo, Doosan and Chinese engine parts, original brand generator Stamford, Leroy-somer, Mecc-alte and other related components, As well as engine spare parts, controller modules, circuit breakers, light towers, external fuel tanks, cables, door locks, antivibration pads, etc., customized ATS systems, parallel control systems, etc.

VIGKOO will bring great enthusiasm and unremitting efforts and committed to becoming a top enterprise in international power accessories.

Our Advantages

FAQ

1. Why Choose us?
Vigkoo has a wide range of cooperative supplier groups. Whether you need to find which power equipment products, Vigkoo can help you quickly enter the Chinese supply system and obtain the latest market products and competitive prices.

2. Delivery Time?
Spare parts about 3-5 days.
Diesel generator set about 30-50 days.

3. Manufacturer or Trade Company?
We have our own factory for OEM manufacture producing, also trade with all electrical parts.

4. Global Warranty?
Yes, usually global warranty 1 year / 1000 hours.
Provide extended warranty service for 2 years / 2000 hours, 3 years, 5 year ... ...

5. Payment terms?
L/C, T/T, Western Union, PayPal

6. Customized service?
Provide customized services according to the customer requirements